CAAPE User's Manual - ALSTOM Signaling Inc.

Using CAAPE GraphicsIn the Serial Messages section at the bottom of the screen, select a message type andclick the Messages button. The Link To Components dialog is displayed.Figure 6–28. Link to Components DialogThe Type control shows the selected message type; the Available list shows allcomponents of the correct type for linking. Select a component from the list and click theAdd button to link the component to the board.When a component is added to a board, it can be opened directly from the board’sediting view. Select a component if there is more than one listed and click the OpenComponent button. In CAAPE versions later than 005K you can also click the MessageWizard button to set the contents of a selected message from a list of availablevariables. See the Message Wizard section below.Open Component buttonMessage Wizard buttonAs components are added to a system they appear in the Project View under theboards that use them. A component listed in the Project View can be opened fromthere by double clicking on it.P2512A, Rev. Oct/09 6–48 Alstom Signaling Inc.