CAAPE User's Manual - ALSTOM Signaling Inc.

Simulator ReferenceCYCExecute the application logic of the current application for the specified number ofcycles or amount of time. If tracing or monitors are set, the affected equations aredisplayed as they execute. See SIM for execution of single statements; see RUN forrunning all applications at once.Formats:whereExamples:DELCYC (execute the logic one full cycle from the current starting point)CYC END (execute the logic until the end of the logic has been reached)CYC NOCHG (execute the logic until no equation results have changed for a fullcycle or until MAX time has elapsed)CYC num-cycles (execute the logic the specified number of cycles from thecurrent starting point)CYC mm MINUTES, ss SECONDS (execute the logic for the specified timeperiod)num-cycles is the number of full logic cycles to run. A cycle is one full passthrough the logic, from the current starting point and back again.mm and ss are the minutes and seconds to run the logic. This period is insimulation time, not necessarily real time as perceived by the user.CYCSee ADD.CYC NOCHGCYC 10CYC 2 MINUTES, 5 SECONDSP2512A, Rev. Oct/09 12–40 Alstom Signaling Inc.