CAAPE User's Manual - ALSTOM Signaling Inc.

Simulator Reference12.6.5. Command Summary (Project Level)The following commands are processed at the project level. Minimum command text isshown in upper case. Commands that can be automatically captured from the userinterface into a script file are indicated in the seconds column.Table 12–3. Project Level CommandsCommand Capture MeaningGet filename Y Read snapshot fileMAX = mm MINUTES, nnSECONDSSet cycling limit to specified timeMAX = FOREVERPROJLOG ONPROJLOG OFFPROJRESET AOCDPROJRESET CPUPROJRESET LAMPPROJRESET SIMPROJRESET VALUERUN mm MINUTES, ssSECONDSYTurn off cycling limitTurn on logging, all applicationsTurn off logging, all applicationsReset AOCD, all applicationsReset CPU, all applicationsReset filaments, all applicationsReset All, all applicationsReset variables, all applicationsCycle all applicationsSETDATE dd/mm/yy Y Set current dateSETTIME hh:mm:ss Y Set current timeSNap filenameSave snapshot fileSNAPD filename Y Save snapshot file, overwrite allowedPROJTRACE ALLPROJTRACE CHGPROJTRACE OFFSHOWTEXT "text"UPDATEPAUSETrace All, all applicationsTrace Change, all applicationsNo Trace, all applicationsIn interactive mode, display the specified text(up to 255 characters) on the status barIn interactive mode, update the user interfacedisplayIn interactive mode, pause execution of thescriptP2512A, Rev. Oct/09 12–58 Alstom Signaling Inc.