SmartView Plus User Manual - CTC Union Technologies Co.,Ltd.

Chapter 3 The Admin Program3.5.2 Add SiteClick the [Site] button to add another SmartView Plus server or SmartView Plus Express to bemanaged by this site.You must fill in Site name, Site IP, Site Port,login account ID, and password. The accountmust be authorized with administrationprivileges.Check [Internet Access] if you are managingthe new site through Internet connection.Check [Connect By Server] if this site willaccess the remote cameras through themanaged server.Check [Alarm Dispatch] if you would like tohave the alarm events from the remote site bedispatched to this site, hence will show up onthe local monitor program. Make sure theremote site has loaded an e-map; otherwisethe e-map of this site will be used to display theremote alarm events.After you have filled in all the blanks and checked the options, click [Create] to add the remotesite to the System Setup Tree. The system will show:to indicate that the operation is successful. Atthis time, the new site will not have any subnode because the actual connection has notyet been made.3.5.3 Connect All SitesAfter remote sites have been added to this site, click this button to connect to the remote sitesand get their configuration information. The System Setup Tree will now be populated with all thedevices that are connected to the remote sites. As shown below:Before connecting all sitesAfter connecting all sites- 28 -