SmartView Plus User Manual - CTC Union Technologies Co.,Ltd.

Chapter 3 The Admin Program3.6.6 Edit Site Device[EditSiteDevice] button provides user the ability to select and administer the site device below.Click [EditSiteDevice] button, the systemwill show the left dialog box. User can puta check on the different device checkboxand administer them.3.6.7 AreaThe procedure to add a new area is the same as adding new area in Site e-map. Please refer tosection 3.5.4 for more information.3.6.8 UploadThis function is same as Upload e-map in section 3.5.6.3.6.9 RefreshThis function is same as Refresh e-map in section 3.5.7.3.6.10 Remove MapThis function is the same as Remove e-map in section 3.5.8.3.7 Area OperationsWhen selecting an area in the System Setup tree, the following function buttons will be shown inthe toolbar:An area must belong to a site. An area can have one to many sites, areas, and devices. The areain SmartView Plus system supports the following devices: LAN Camera, Video Gateway, I/OController, and Card Access Controller.- 36 -