SmartView Plus User Manual - CTC Union Technologies Co.,Ltd.

Chapter 3 The Admin Program3.8.6 Configuring Cameras Connected to a Video GatewayThe button represents one video source of the device it belongs to, either a video serveror a LAN camera. If that device has multiple video sources, you will see as many buttonsunder that device (and sensor (DI) buttons and relay (DO) buttons as you will see later).When you select a video source, by clicking the button, in the System Setup tree thebuttons in the tool bar will become:andThe [Breach] and [Motion Detect] button will appear only if the selected camera has motiondetection capability.The [PreSet] button will appear only if the selected camera comes with PTZ functions.3.8.6.1 CCD SettingClick [CCD Setting] will bring up the video source property setting dialog as shown below:Click [OK] to save the settings and close this dialog.Click [Apply] to save the settings of the selected [Node], and let you set the properties of theother video nodes under current device without leaving this dialog.Click [Cancel] to leave this dialog without saving anything.- 41 -