Installation Operation and Maintenance Manual

More documents

Recommendations

Info

Maintenance (Continued)Surface inspection locationsThis figure shows the areas to inspect for wear on the bearing frame outside surface.228Figure 19: Outside surface inspection locationsThis figure shows the areas to inspect for wear on the bearing frame inside surface.241C-face adapter inspectionChecklistFigure 20: Inside surface inspection locations• Visually inspect the C-face adapter (340) for cracks.• Check all surfaces for rust, scale, or debris and remove all loose and foreign material.• Check for corrosion or pitting.This figure shows the areas to inspect for cracks on the C-face adapter.Figure 21: C-face adapter inspection locations84 Model 3796 i-FRAME Installation, Operation, and Maintenance Manual
Maintenance (Continued)Seal chamber and stuffing box cover inspectionChecklistPerform these checks when you inspect the seal chamber and stuffing box cover:• Make sure that these surfaces are clean:• Seal chamber and stuffing box cover• Mounting• Make sure there is no pitting or wear greater than 1/8 in. (3.2 mm) deep.Replace the seal chamber and stuffing box cover if pitting or wear exceeds this measurement.• Inspect the machined surfaces and mating faces noted in the figures.These images point to the areas to inspect on the seal chambers, stuffing box covers, and backplates:184Figure 22: BigBore TM chamber184Figure 23: Stuffing box coverModel 3796 i-FRAME Installation, Operation, and Maintenance Manual 85
Page 1:
Goulds PumpsInstallation, Operation
Page 4 and 5:
Table of ContentsImpeller-clearance
Page 6 and 7:
Introduction and SafetyIntroduction
Page 8 and 9:
Introduction and Safety (Continued)
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Transportation and Storage (Continu
Page 22 and 23:
Product DescriptionProduct Descript
Page 24 and 25:
Product Description (Continued)Cove
Page 26 and 27:
Product Description (Continued)Tabl
Page 28 and 29:
InstallationInstallationPreinstalla
Page 30 and 31:
Installation (Continued)Piping chec
Page 32 and 33:
Installation (Continued)Liquid sour
Page 34 and 35:
Installation (Continued)Example: Di
Page 36 and 37: Installation (Continued)d) Make sur
Page 38 and 39: Installation (Continued)76152341. U
Page 40 and 41: Installation (Continued)Baseplate-l
Page 42 and 43: Installation (Continued)WhenPeriodi
Page 44 and 45: Installation (Continued)1. Set the
Page 46 and 47: Installation (Continued)C-face adap
Page 48 and 49: Commissioning, Startup, Operation,
Page 66 and 67: MaintenanceMaintenanceMaintenance s
Page 68 and 69: Maintenance (Continued)Regrease the
Page 70 and 71: Maintenance (Continued)Packed stuff
Page 72 and 73: Maintenance (Continued)1. Is your b
Page 74 and 75: Maintenance (Continued)Clean surfac
Page 76 and 77: Maintenance (Continued)5. Remove th
Page 78 and 79: Maintenance (Continued)3. Remove th
Page 80 and 81: Maintenance (Continued)134236A370D4
Page 82 and 83: Maintenance (Continued)253B168A4961
Page 84 and 85: Maintenance (Continued)2. Loosen th
Page 88 and 89: Maintenance (Continued)444Figure 24
Page 90 and 91: Maintenance (Continued)Bearing fits
Page 92 and 93: Maintenance (Continued)168361A12238
Page 94 and 95: Maintenance (Continued)372T 113A 40
Page 96 and 97: Maintenance (Continued)a) Coat the
Page 98 and 99: Maintenance (Continued)13411. Prepa
Page 100 and 101: Maintenance (Continued)4. Check the
Page 102 and 103: Maintenance (Continued)333AINPRO la
Page 104 and 105: Maintenance (Continued)Seal the sha
Page 106 and 107: Maintenance (Continued)c) Install t
Page 108 and 109: Maintenance (Continued)126412A101In
Page 110 and 111: Maintenance (Continued).030101For m
Page 112 and 113: Maintenance (Continued)100351418100
Page 114 and 115: Maintenance (Continued)Table 18: Ma
Page 116 and 117: Maintenance (Continued)Table 22: Lu
Page 118 and 119: TroubleshootingTroubleshootingOpera
Page 120 and 121: Troubleshooting (Continued)i-ALERT
Page 122 and 123: Parts Listings and Cross-Sectional
Page 132: Other Relevant Documentation or Man
show all

Installation Operation and Maintenance Manual

Create successful ePaper yourself

Delete template?

Save as template?