A1A - EIL Tender portal

orfr ftemm ENGNEERs
uyirrED
IA Govt. of India Undertaking)
BRACKET SUPPORT FOR
VERTICAL VESSEL
STANDARD No.
7-12-0008 Rev. 5
Page 1 of 1
1801 — 2000 650 500 400 550 25 14 350 50 0 z3 0z 550 60
3
1601 — 1800 600 450 350 500 25 14 300 50 g g ,.., 540 55
,, 2„g
1401 — 1600 550 400 300 450 25 14 250 50 -t- D 2 540 50
re
w
1 R
z w —
1201 — 1400 500 350 250 450 25 12 200 25 zw ,... 3 LoS z 470 40
0 00
1001 — 1200 450 320 220 400 20 12 180 25 6 ,0 6 2 450 30
801 — 1000 450 280 200 400 20 12 150 25 i nj ig 450 25
VESSEL OUTSIDE DIA. A B C E F G H J Mew
W
W
ANCHOR
MAXIMUM
t v , ALLOWABLE
intum
VESSEL
MA. -- WEIGHT
(TONNE)
1-60 VENT HOLE
25
•
REFER NOTE-3
(SEE ENGINEERING
DRAWING)
't's SHELL THK.
'X'
REFER NOTE-6
O/D OF VESSEL
NOTES
ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE STATED.
NUMBER OF BRACKETS SHALL BE FOUR PER VESSEL
PAD THICKNESS SHALL BE AS PER ENGINEERING DRAWING.
FOR VESSELS UPTO 800 mm DIA. REFER ENGINEERING DRAWING.
5. IN CASE OF CONFLICT ENGINEERING DRAWING SHALL GOVERN.
'6. DISTANCE 'X' IS TO BE FINALISED CONSIDERING INSULATION THICKNESS, BOLT SIZE AND ERECTION
REQUIREMENT AND SHALL BE KEPT MINIMUM.
7. EARTHING LUG SHALL BE AS PER STANDARD 7-12-0026.
5 30.06.2011 REAFFIRMED AND REISSUED AS STANDARD POREL KT DM
4 08.09.2006 REAFFIRMED AND REISSUED AS STANDARD POREL DNN AKM VC
Rev.
Prepared Checked Stds. Committee Stds. Bureau
Date
Purpose
Convenor Chairman
No. Page 147 of 291
by by
Approved by
Format No. 8-00-0001 -F4 Rev.0
Copyright EIL - All rights reserved