testing
This is just a test
This is just a test
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
▍<br />
Intel SATA RAID<br />
Degraded RAID Array<br />
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive<br />
members fails or is temporarily disconnected, and data mirroring is lost. As a result, the<br />
system can only utilize the remaining functional hard drive member. To re-establish<br />
data mirroring and restore data redundancy, refer to the procedure below that corresponds<br />
to the current situation.<br />
Missing Hard Drive Member<br />
1. Make sure the system is powered off.<br />
2. Reconnect the hard drive.<br />
3. Reboot the system to Windows; the rebuild will occur automatically.<br />
Failed Hard Drive Member<br />
1. Make sure the system is powered off.<br />
2. Replace the failed hard drive with a new one that is of equal or greater capacity.<br />
3. Reboot the system to Intel RAID Option ROM by press and keys simultaneously<br />
during the Power-On Self Test (POST).<br />
4.<br />
Select the port of the destination disk for rebuilding, and then press ENTER.<br />
B-26
Change language