testing
This is just a test
This is just a test
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MS-7589<br />
JMicron RAID BIOS Utility<br />
Be sure to set RAID mode for the JMicron 36x ATA Controller in BIOS before configuring<br />
the JMicron BIOS utility. After that, save the configuration and exit. During boot up<br />
(POST), press CTRL+J to enter the JMicron BIOS RAID utility.<br />
The RAID Utility menu screen will be displayed. A brief description of each section is<br />
presented below.<br />
Main Menu<br />
Cerate RAID Disk Drive - Create a new legacy RAID set.<br />
Delete RAID Disk Drive - Delete a legacy RAID set.<br />
Revert HDD to Non-RAID - Revert an existed-RAID HDD to non-RAID.<br />
Solve Mirror Conflict - Sovle a mirror conflict.<br />
Rebuild Mirror Drive - Rebuild data, when RAID 1 or RAID 10 data mirroring is lost.<br />
Save And Exit Setup - Save all settings and exit the BIOS utility.<br />
Exit Without Saving - Exit the BIOS utiltiy without any saving.<br />
Hard Disk Driver List<br />
The menu shows the model number and capacities of the drives physically attached to<br />
the SATAII & PATA ports.<br />
RAID Disk Driver List<br />
The menu shows the current configuration of RAID set.<br />
C-3