testing
This is just a test
This is just a test
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
▍<br />
JMicron RAID<br />
Introduction<br />
JMicron JMB363 offers RAID level 0 (Striping), RAID level 1 (Mirroring and Duplexing),<br />
RAID level 10 (A Stripe of Mirrors) and JBOD (Concatenate).<br />
RAID 0 breaks the data into blocks which are written to separate hard drives. Spreading<br />
the hard drive I/O load across independent channels greatly improves I/O performance.<br />
RAID 1 provides data redundancy by mirroring data between the hard drives<br />
and provides enhanced read performance. RAID 10 Not one of the original RAID levels,<br />
multiple RAID 1 mirrors are created, and a RAID 0 stripe is created over these. JBOD<br />
provides a method for combining drives of different sizes into one large disk.<br />
Important<br />
• This mainboard supports RAID 0/ RAID 1 or JBOD mode only.<br />
• The least number of hard drives for RAID 0, RAID 1 or JBOD mode is 2.<br />
• All the information/ volumes/ pictures listed in your system might differ from the illustrations<br />
in this appendix. RAID Configuration<br />
C-2