BIG KAISER High Performance Tooling Solutions 2018-2019

ANGLE HEADS
Catalog
Number
ød øE G K L L1 L2 M P Q øF Collet
Max
RPM
Weight
(lbs.)
BBT50-AG90/NBS10-315LS
12.40
2.17 7.17
42.5
-345LS 13.58 10.24 3.35 8.35 43.4
-375LS 14.76 4.53 9.53 44.1
-415LS 16.34
2.17 11.10 52.2
-445LS .059-.394 1.181 1.181 .984 17.52 14.17 3.35 12.28 1.77 1.69 3.583 NBC10- 6,000 53.1
-475LS 18.70 4.53 13.46 53.8
-515LS 20.28
2.17 15.04 61.9
-545LS 21.46 18.11 3.35 16.22 62.8
-575LS 22.64 4.53 17.40 63.5
-AG90/NBS13-315LS
12.40
2.17 7.17
42.8
-345LS 13.58 10.24 3.35 8.35 43.7
-375LS 14.76 6.10 9.53 44.3
-415LS 16.34
2.17 11.10 52.5
-445LS .098-.512 1.378 1.220 1.102 17.52 14.17 3.35 12.28 2.05 1.77 3.976 NBC13- 6,000 53.4
-475LS 18.70 6.10 13.46 54.0
-515LS 20.28
2.17 15.04 62.2
-545LS 21.46 18.11 3.35 16.22 63.1
-575LS 22.64 6.10 17.40 63.7
-AG90/NBS20-330LS
12.99 10.24 2.76 7.76
45.2
-430LS .098-.787 1.811 1.378 1.378 16.93 14.17 2.76 11.69 2.56 2.44 5.197 NBC20- 3,000 54.9
-530LS 20.87 18.11 2.76 15.63 64.6
A.2 BBT/BT
• Nut and wrench are included, collet must be ordered separately
• Output spindles of twin head do not rotate in forward direction simultaneously
• The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable
• A stop block is required when mounting on machines must be order separately
• When supplied through the stop block, coolant can be ejected from the housing
• Automatic tool change may not be available depending on machine tool models
• NEW BABY ENDMILL COLLETS cannot be used
ACCESSORIES
!
CAUTION
A Stop Block is required. The rotation of the cutting tool is in
reverse direction of the machine spindle (Speed Ratio 1:1).
COLLET
PG. 338
WRENCH
PG. 350
STOP BLOCK
PG. 385
151