BIG KAISER High Performance Tooling Solutions 2018-2019

BASIC ARBORS
SMART DAMPER MILLING—DAMPER HEAD
COOLANT
L
L2
L1
G
THROUGH
øD
øD11
W
Catalog
Number
øD øD1 L L1 L2 W G
Weight
(lbs.)
C-Spanner
Model
A.3 HSK
SDF36-FMH22DP-47-180 22mm 1.850 7.087 .709 .197 .394 M10 6.6 FK45-50L
-60-180 22mm 2.362 7.087 .709 .197 .394 M10 9.9
-FMH27DP-60-180 27mm 2.362 7.087 .787 .236 .472 M12 9.9
FK58-62L
SDF36-SMC.750DP-47-180 .750 1.850 7.087 .689 .160 .313 3/8"-24 6.6 FK45-50L
-SMC1.000DP-60-180 1.000 2.362 7.087 .689 .220 .375 1/2"-20 9.9 FK58-62L
• Hook wrench and cutter clamping screw are included
• The weight does not include the cutter
• Refer to the operation manual regarding the mounting method to the basic holder
• If the provided clamping screw is not compatible, separately select one from the clamping screw table on Pg. 390
• øC indicates the smallest mounting surface diameter of the cutter that can be mounted on the arbor, be careful when using a cutter
with the mounting diameter considerably smaller than the cutting diameter, as it may not fit
195