BIG KAISER High Performance Tooling Solutions 2018-2019

ACCESSORIES
CENTERING HOLDER FOR LATHE
Easy And Reliable Centering Adjustment For Turret Lathe Sleeve Holder
CLAMPING RANGE: ø.5-20mm
The rotation center of the workpiece and the center of the turret pot may be misaligned not only in the
center height direction, but also in the X-axis direction. In order to easily correct the deviation of both
directions at the same time, a polar coordinate system combining rotary and linear movement is used.
Single two way adjusting bolt completes adjustment of center height both up and down.
COOLANT
THROUGH
Adjustment
Amount ±.5mm
Rotation Range ±45°
L
L1
øD2
øD1
ød
øD
Catalog
Number
ød øD øD1 øD2 L L1
SLS32-NBS8CH-45 .020-.315 1.260 .984 1.890 1.811 2.283 3.5
SLS40-NBS20CH-60 .098-.787 1.575 1.811 2.913 2.362 2.677 5.5
• NEW BABY NUT is included, collet and wrench must be ordered separately
• Center through coolant supply is available
ACCESSORIES
COLLET
PG. 338
NUT
PG. 350
PERFECT SEAL
PG. 348
WRENCH
PG. 350
Weight
(lbs)
A.6 CYLINDRICAL & N/C LATHE
295