BIG KAISER High Performance Tooling Solutions 2018-2019

MEASURING INSTRUMENTS
TYPE MU/FS
• Dial indicator stand with
cast iron base
• Specifications of clamp
arm same as type MU/F
W
• Base with 3-point sliding
contact and one flat side
for parallel measurement
H
L
Catalog
Number
Adapter
Arm Extension Capacity L
(From Magnet Top)
Base Size
W x H x D
Weight
(Not Including Arm)
• 100mm extension arm available to increase
work radius (Catalog Number 20.580.513)
20.530.102 DGH2
20.530.103 DGH3
20.530.104 DGH4
13.937
(354mm)
5.984 x 1.850 x 5.984
(152mm x 47mm x 152mm)
6.6 lbs.
(3 kg)
TYPE SG
• Articulated clamping arm for gluing, welding or soldering
• Quickly solves all tricky angling problems
• Simultaneous tensioning action
Catalog
Number
Description
Extension
Number
Extension
Length
20.540.001
Type SG 3/4
Arm with One Tension Clamps
No. 3
No. 4
2.953 (75mm)
3.937 (100mm)
20.540.002
Type SG 4/4
Arm with Two Tension Clamps
No. 4
3.937 (100mm)
DIAL GAUGE ADAPTERS
A significant disadvantage of current models of dial gauge adapters
is that their construction, out of two or more components, results in
an unavoidable play or slackness in the adapter. The solution to this
challenge is a new type of adjustable adapter consisting of a single
shaped part. This part forms two opposing legs whose relative position
can be fine-adjusted by means of a tensioning screw (DGH3). A special
micro model (DGH4) with a fine-adjustment rocker is also available for
measurement precision in the μm range. All adapters include a ø.375"
cylindrical gauge adapter.
M8 P1.25
Thread
60º
1.65mm
4.6mm
60º
6mm
14mm
12mm
ø.375"
DGH2
DGH3
DGH4
CYLINDRICAL
GAUGE ADAPTER
Catalog
Number
Catalog
Number
Catalog
Number
Catalog
Number
Clamping
ø
20.580.402
• Basic model
(without fine-tuning screw)
20.580.403
• Standard adapter for
MU and SU stands
20.580.404
• Precision micro model
20.580.501 .250
20.580.502 .375
20.580.511 4mm
20.580.512 8mm
613
D.1 ACCESSORIES