BIG KAISER High Performance Tooling Solutions 2018-2019

COLLET CHUCK
Catalog
Number
ød øD L L1 H Collet Nut Wrench
Max
RPM
Weight
(lbs.)
HSK-A100-MEGA6N-90
3.54 1.69
20,000 5.5
-105 4.13 2.28
5.5
18,000
-120 .010-.236 .787 4.72 2.87 .91-1.69 NBC6- MGN6 MGR20
5.5
-135 5.31 3.46 14,000 5.5
-165 6.50 4.45 12,000 5.7
-MEGA8N-90
3.54 1.69
20,000 5.5
-105 4.13 2.28
5.7
18,000
-120 .020-.315 .984 4.72 2.87 1.02-1.77 NBC8- MGN8 MGR25
5.7
-135 5.31 3.46
6.0
14,000
-165 6.50 4.45 6.0
-MEGA10N-90
3.54 1.69 1.50-1.77
20,000 5.7
-105 4.13 2.28
6.0
18,000
-120 .059-.394 1.181 4.72 2.87 NBC10- MGN10 MGR30
6.0
1.50-1.89
-135 5.31 3.46
6.2
14,000
-165 6.50 4.45 6.6
-MEGA13N-90
3.54 1.69 2.17
18,000 6.0
-105 4.13 2.28 2.76
6.2
16,000
-120 4.72 2.87
6.4
.098-.512 1.378
NBC13- MGN13 MGR35
-135 5.31 3.46
6.6
1.73-2.48
14,000
-165 6.50 4.65 7.1
-200 7.87 5.83 10,000 7.7
-MEGA16N-90
3.54 1.85 2.17
15,000 6.2
-105 4.13 2.28 2.76
6.4
14,000
-120 4.72 2.87
6.8
.098-.630 1.654
NBC16- MGN16 MGR42
-135 5.31 3.46
7.1
1.89-2.68
13,000
-165 6.50 4.65 7.9
-200 7.87 5.94 10,000 8.8
-MEGA20N-90
3.54 1.85 2.17
15,000 6.4
-105 4.13 2.28 2.76
6.6
14,000
-120 4.72 2.87
7.1
.098-.787 1.811
NBC20- MGN20 MGR46
-135 5.31 3.46
7.3
2.01-2.68
13,000
-165 6.50 4.65 8.4
-200 7.87 6.02 10,000 9.5
-MEGA25N-120 4.72 307 12,000 8.4
.610-1.000 2.362
3.35
NBC25- MGN25 MGR60L
-165 6.50 4.84 2.52-2.91 10,000 10.1
HSK-A125-MEGA20N-120
4.72 3.07
12,000 10.3
.098-.787 1.811
2.01-2.68 NBC20- MGN20 MGR46
-165 6.50 4.65 10,000 11.4
A.3 HSK
• MEGA NEW BABY NUT is included, coolant pipe, collet, wrench and adjusting screw must be ordered separately
• Weight includes nut but not collet
• Center through coolant supply is available
• Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance,
when using, slowly ramp up to the appropriate speed starting from slow speeds
• “H” indicates the adjustment length with an adjusting screw
• “H” dimension is the Max tool shank length that can be inserted into the holder
• Adjusting screws cannot be used with models marked
ACCESSORIES
COLLET
PG. 338
MEGA NUT
PG. 344
PERFECT SEAL
PG. 346
MEGA WRENCH
PG. 368
SCREW
PG. 389
175