BIG KAISER High Performance Tooling Solutions 2018-2019

FINE BORING HEADS
SETTING JIG
The setting jig can be easily assembled on the front face of the boring heads EWN/EWB 2-50.
Set the measuring slide to the required projection length. Pull the tool holder until the cutting edge touches the lower end of the
measuring slide. Align the cutting edge with the edge of the measuring slide.
The scale on the measuring slide provides a coarse diameter setting.
Catalog
Number
Description
10.112.817 Setting Jig EWN2-50
10.112.819 Setting Jig EWN2-50 Inch
FINE BORING
B.2
2.441
7.874
A
A
3.307
A - A
446