BIG KAISER High Performance Tooling Solutions 2018-2019

BASIC ARBORS
Catalog
Number
BCV50-SMC.750-2
-SMC1.000-2
-SMC1.250-2
-SMC1.500-2
-SMC2.000-2.5
Fig. øD1 øD2 øD3 L L1 L2 L3 W G
2.00
-4 .750 1.689 .88 4.00 .16
.313 3/8"-24 8.7
-6 6.00 9.9
2.00
-4 4.00 .38
9.6
-6 6.00 11.7
1.000 2.189 1.12
.22 .375 1/2"-20
-8 8.00 13.7
-10 1
10.00 .69
15.7
-12 12.00 17.7
2.00
-4 4.00 11.4
-6 6.00 14.6
1.250 2.752 1.50
.28
.500 5/8"-18
-8 8.00 17.8
-10 10.00 20.5
-12 12.00 23.7
2.00
-4 4.00 12.8
.50
-6 6.00 16.0
1.500 3.626 1.88
.38 .625 3/4"-16
-8 8.00 25.5
-10 10.00 .93
31.1
2
-12 12.00 37.0
2.50
-4 2.000 4.874 2.50 4.00 .750 1"-14 16.0
.44
-6 6.00 25.5
-SMC2.500-2.5 2.500 4.874 3.13 2.50 1.13 1.000 1"-14 13.7
-FMH22-47-50
1.850
7.4
3 22mm
.63
.71 .20 .39 .394 M10x1.5
-60-50 2.362 7.7
1.97
-FMH27-76-50
27mm 2.992 .71 .79 .24 .47 .472 M12x1.75 8.0
-FMH32-76-50 4 32mm 2.992 .94 .87 .28 .63 .551 M16x2 8.0
BCV50H-FMH60-90 60mm 5.512 — 3.54 1.58 .44 — 1.000 M20x2.5 20.0
Weight
(lbs.)
7.4
7.6
8.2
9.2
11.1
A.1 BCV/CV
• Cutter clamping screw is included
• The weight does not include the cutter
• If the provided clamping screw is not compatible, separately select one from the clamping screw table on Pg. 390
• When using a cutter without oil holes, an optional clamping screw with a through hole allows coolant supply
• øD2 indicates the smallest mounting surface diameter of the cutter that can be mounted on the arbor, be careful when using a cutter
with the mounting diameter considerably smaller than the cutting diameter, as it may not fit
ACCESSORIES
LOCK SCREW
PG. 390
CAUTION
!
For high speed applications, Shell Mill Holders should be balanced together with the cutters.
73