BIG KAISER High Performance Tooling Solutions 2018-2019

R
MEGA SYNCHRO TAPPING HOLDER OVERVIEW
R
TAPPING RANGE: ANSI: NO.0-NPT1", JIS/DIN/ISO: M1-M36
Tool holder for rigid tapping compensates for
synchronization errors during rigid tapping. Improves
thread quality and tool life by reducing thrust loads
caused by synchronization errors up to 90%.
* Patent is licensed from EMUGE
S P I N D L E S Y S T E M
DUAL CONTACT
Tapping
54 Body Models and 276 Tap Holder Models are Available
Large tap series achieves a maximum of NPT1". An extensive variety of bodies
suitable for many spindle types. Short, middle & long tap holders are standardized to
cover between No.6 and NPT1" (M2 and M36). The slim design avoids interference.
DRIVE KEY
Secure Drive
The body and Tap Holder are fixed with a drive key in the
rotation direction as well as the square of the tap.
THROUGH TOOLS
JET THROUGH
Coolant Through Center Capability
for All Models
Coolant is supplied both through
the tool and to the tool periphery
simultaneously.
Coolant is Supplied
Through Both the
Tool and Slits of
the Tap Holder
Coolant is Supplied
Through Slits of the
Tap Holder
28