BIG KAISER High Performance Tooling Solutions 2018-2019

COLLET CHUCKS
MEGA DOUBLE POWER CHUCK
CLAMPING RANGE: ø16-32mm
For Heavy Duty End Milling
MAX
28,000
RPM
COOLANT
THROUGH
H
Min. Clamping Length E
HSK
A.3
ød
øD
øD1
L
L1
Catalog
Number
ød øD øD1 L L1 H E Wrench
Weight
(lbs.)
HSK-F63-MEGA16D-80A 16mm 1.654 2.087 3.15 .98 2.17 1.97 MGR42L 2.6
-MEGA20D-90A 20mm 1.969 2.165 3.54 1.34 2.56 2.20 MGR50L 3.1
-MEGA25D-100A 25mm 2.441 2.480 3.94 1.54 2.95 2.24 MGR62L 4.0
-MEGA32D-105A 32mm 2.756 2.795 4.13 1.30 3.15 2.52 MGR70L 4.4
• Wrench must be ordered separately
• Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using,
slowly ramp up to the appropriate speed starting from slow speeds
• “H” dimension is the Max tool shank length that can be inserted into the holder
• Contact us for a plug screw to block a coolant through hole
• In case our HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
H
Min. Clamping Length E
JET THROUGH
COOLANT
THROUGH
ød
øD
øD1
L
L1
Catalog
Number
ød øD øD1 L L1 H E Wrench
Weight
(lbs.)
HSK-F63-MEGA16DS-80A 16mm 1.654 2.087 3.23 1.06 2.24 2.05 MGR42L 2.6
-MEGA20DS-90A 20mm 1.969 2.165 3.62 1.42 2.64 2.28 MGR50L 3.1
-MEGA25DS-100A 25mm 2.441 2.480 4.02 1.61 3.03 2.32 MGR62L 4.0
-MEGA32DS-105A 32mm 2.756 2.795 4.21 1.38 3.23 2.60 MGR70L 4.4
• Wrench must be ordered separately
• Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using,
slowly ramp up to the appropriate speed starting from slow speeds
• Jet-through type provides coolant form the chuck nose, thus tools with oil holes cannot be used
• “H” dimension is the Max tool shank length that can be inserted into the holder
• Contact us for a plug screw to block a coolant through hole
• In case our HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
ACCESSORIES
COLLET
PG. 364
PERFECT SEAL/
JET COLLET
PG. 361
MEGA WRENCH
PG. 368
224