BIG KAISER High Performance Tooling Solutions 2018-2019

ANGLE HEADS
AG90 HMC TYPE
For Heavy Duty End Milling
MAX
3,000
RPM
Coolant Pipe
(Optional)
S=4.331
9.45 1.772
ø3.15
ø1.250
ø4.921
2.56
3.94
Min.Access Bore ø6.89
1.772 1.772
A.3 HSK
3.82
.236 Collar Compression
.118 Pin Compression
Fixed Length A
R.827
!
CAUTION
A Stop Block is required. The rotation of the cutting tool is in
same direction of the machine spindle.
Catalog
Number
Weight
(lbs.)
HSK-A100-AG90/HMC1.250-240 35.2
• Wrench is included, coolant pipe must be ordered separately
• The angles of the locating pin to the drive key groove and direction of cutting edge
are freely adjustable
• A stop block is required when mounting on machines must be order separately
• When supplied through the stop block, coolant can be ejected from the housing
• Automatic tool change may not be available depending on machine tool models
For Applications Where Increased Rigidity is Required
MAX
3,000
RPM
Coolant Pipe
(Optional)
S=4.331
9.45 1.772
ø3.15
ø1.250
ø4.921
3.94 2.56
Min.Access Bore ø6.89
1.772 1.772
3.82
.236 Collar Compression
.118 Pin Compression
Fixed Length A
R.827
!
CAUTION
A Stop Block is required. The rotation of the cutting tool is in
same direction of the machine spindle.
Catalog
Number
Weight
(lbs.)
HSK-A100-AG90/HMC1.250-240S 38.1
• Wrench is included, coolant pipe must be ordered separately
• The angles of the locating pin to the drive key groove and direction of cutting edge
are freely adjustable
• A stop block is required when mounting on machines must be order separately
• When supplied through the stop block, coolant can be ejected from the housing
• Automatic tool change may not be available depending on machine tool models
ACCESSORIES
COLLET
PG. 364
WRENCH
PG. 367
STOP BLOCK
PG. 385
207