BIG KAISER High Performance Tooling Solutions 2018-2019

SPEED INCREASERS
A.1
BCV/CV
AIR POWER SPINDLE—RBX5 & RBX7 For High Speed Micro Machining with Automatic Tool Change
ZERO
MACHINE SPINDLE
ROTATION
K1
L
.87
Max ø.157
ø.472
MAX
80,000
RPM
S
øD
Air
R
K2
S P I N D L E S Y S T E M
DUAL CONTACT
Catalog
Number
Practical Spindle
Speed (RPM)
Cutting
Diameter
L øD K1 K2 S
Weight
(lbs.)
BCV40-RBX7-4S-165-65 60,000-80,000 ø.039 or smaller
3.150
8.8
6.50
2.24 1.85 2.559
-RBX5-4S-165-65 40,000-50,000 ø.059 or smaller 3.780 11.0
BCV50-RBX7-4S-170-80 60,000-80,000 ø.039 or smaller
19.1
6.69 3.937 2.44 2.05 3.150
-RBX5-4S-170-80 40,000-50,000 ø.059 or smaller 21.3
• Nut and wrench are included, collet must be ordered separately
• XF1-NPT (Air Unit) must be ordered separately
CAUTION
!
Compressed air to drive the AIR POWER SPINDLE must be
clean. Coolant should not be supplied through the spindle on
the machine that uses the AIR POWER SPINDLE.
For High Speed Micro Machining with Compressed Air Through the Machine Spindle
L
MAX
80,000
RPM
K .87
Max ø.157
ø.472
Air
øD
R
S P I N D L E S Y S T E M
DUAL CONTACT
Catalog
Number
Practical Spindle
Speed (RPM)
Cutting
Diameter
L øD K1
Weight
(lbs.)
BCV40H-RBX7C-4S-150 60,000-80,000 ø.039 or smaller
3.150
6.8
5.91
1.69
-RBX5C-4S-150 40,000-50,000 ø.059 or smaller 3.780 9.0
BCV50-RBX7C-4S-145 60,000-80,000 ø.039 or smaller
3.150
12.8
5.71
1.50
-RBX5C-4S-145 40,000-50,000 ø.059 or smaller 3.780 15.0
• Nut and wrench are included, collet must be ordered separately
• XF1-NPT (Air Unit) is required must be ordered separately
ACCESSORIES
!
CAUTION
Compressed air to drive the AIR POWER SPINDLE must be
clean. Coolant should not be supplied through the spindle on
the machine that uses the AIR POWER SPINDLE .
COLLET
PG. 334
STOP BLOCK
PG. 385
AIR UNIT
PG. 388
96