BIG KAISER High Performance Tooling Solutions 2018-2019

C-CUTTER BOY & BF CUTTER OVERVIEW
Chamfering Tool
HOLE DIAMETER: ø.20"-1.00"
The carbide guide prevents chatter on bench drilling machines.
Economical three-corner insert.
CHAMFERING TOOL
FOR DRILL PRESS
Carbide Guide Allows Stable Cutting
Carbide guide allows stable cutting and prevents
triangular chamfering. It does not damage the body,
extending the life.
Carbide Guide
Insert That Does Not Need to be Reground
Inserts do not require regrinding. Moreover, the
carbide coating insert with 3 usable corners offers
lower cost and extended tool life.
Although the C-Cutter Boy has been developed for chamfering using a drill press, it is also capable of stable chamfering without chattering even in
low-rigidity conditions such as horizontal machining with long projection, thanks to the carbide guide.
Reliable Cooling Through Oil Hole
Coolant can be supplied to cutting edges (all models).
It securely supplies coolant even in places that are hard to
reach such as when machining a rear surface, contributing
to the extension of tool life.
BF-CUTTER
Back Spot Facer
CAP BOLT SIZE: M6 - M30
• Economical insert type
• Optimal design that matches the cap bolt size
Easy NC Programming
Simple programming: Offset the machine spindle and starting hole centers before inserting the BF-Cutter into the hole.
1 2 3 4 5 6 7
There is no official standard spot facing diameter for the cap bolt. Unifying the cap bolt spot facing diameter is one of the ways to reduce costs. In doing so,
consider the spot facing diameter of the BF-Cutter.
55