BIG KAISER High Performance Tooling Solutions 2018-2019

LARGE DIAMETER BORING HEADS OVERVIEW
The system is based on aluminum extension slides of different lengths, which support a variety of aluminum and steel components
for roughing and finishing tool assemblies. The mounting components are pinned to fit onto specific locations on the slides, and
secured with steel bolts. The precise positioning of the components on the slide along with incremental adjustment scales for
insert holders permit diameter and length setting without a tool presetter.
SERIES 318 WITH FLANGE ONLY
Execution with flange only. Especially built to fit on
machine tools with 40 taper spindle. For rough and fine
boring, OD turning, chamfering and face grooving.
ø7.87"-13.39" (ø200-340mm)
CKB6/CKN6
PG. 479
SERIES 318 WITH FLANGE AND EXTENSION SLIDE
Edition with flange and extension slides. For rough and fire
boring, OD turning, chamfering and face grooving.
ø7.87"-24.41" (ø200-620mm)
CKB7/CKN7
PG. 479
SERIES 318 WITH BRIDGE AND EXTENSION SLIDES
LARGE DIAMETER BORING
B.4
Edition with shanks, large bridges and extension slides.
For rough and fine boring, OD turning and face grooving.
ø24.41"-118.11" (ø620-3000mm)
DV50/BT50/HSK-A100
PG. 488
478