BIG KAISER High Performance Tooling Solutions 2018-2019

DRILLS
SERIES 336 INSERT DRILL
• Large, helical flutes reinforced at the edges provide highest strength and chip space
• Through the tool coolant, directed on both sides at the cutting edges to guarantee optimum cooling and chip evacuation
• Case hardened steel construction for maximum rigidity and toughnes
CKB6 AND CKB7 CONNECTION PROVIDES:
• Highest stability by clamping the drill to the shank both axially and radially at the largest seating diameter
• Lowest amount of drill runout
• Minimum gauge lengths
• Versatile CKB6 connection for all diameters 3/4" to 2-1/2" allows more flexibility on smaller machines
• Widest range of shanks and coolant inducers
CARBIDE INSERTS:
• ISO standard WCMX inserts for both inside and outside cutting edges provide 3 indexes
• Positive cutting geometry for reduced cutting forces
• Different grades optimize cutting conditions
INSERT DRILL SIZES:
• CKB6 connection, ø3/4" to ø2-1/2" and ø31mm to ø61mm
• CKB7 connection, ø2-5/8" to ø2-7/8"
INSERT DRILL LENGTHS:
• 2xD and 3xD for all sizes
APPLICATION ADVICE
PG. 537
CUTTING TOOLS
C.1
530