1989_MELPS_7700_Software_Manual

PLP
Operation
Pull Processor Status from Stack
S(-S+1
PSL (- M(S)
S(-S+1
PSH (- M(S)
PLP
Description
The stack pOinter S is incremented and then restores the lower byte of the
processor status register PS with the data at the address indicated by the stack
pointer S. Again, increments the stack pointer S and then restores the upper byte
of the processor status register PS with the data at the address indicated by the
stack pOinter S.
Status flags
Changes to the values restored from the stack.
Addressing mode Syntax Machine code Bytes Cycles
Stack PLP 2816 1 6
119