1989_MELPS_7700_Software_Manual

PLT
Pull Data Bank Register from Stack
PLT
Operation
Sf-S+1
DT f- M(S)
Description
The stack pointer S is incremented, and then the data bank register DT is
restored with the data at the address indicated by the stack pointer S.
Status flags
IPL : Not affected.
N Set to 1 when bit 7 of the operation result is 1. Otherwise, cleared to O.
V Not affected.
m Not affected.
x Not affected.
D Not affected.
Not affected.
Z Set to 1 when the result of operation is O. Otherwise, cleared to O.
C Not affected.
Addressing mode Syntax Machine code Bytes Cycles
Stack PLT AB16 1 6
120