You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 1: Create the base<br />
Creating <strong>Virtual</strong> <strong>Machine</strong> Models with Quest<br />
Adding Physical Entities to the Model<br />
� Select “<strong>Machine</strong>01” in the model navigator so that the base will be defined attached to<br />
the machine.<br />
� Select Simulation»Construct Entity»Cube<br />
� Type the following:<br />
–1500 Enter –500 Enter 0 Enter<br />
3000 Enter 1000 Enter 200 Enter<br />
� The Cube properties dialog will then appear.<br />
Type “Base” as the entity name.<br />
� Select the Material button and select or create<br />
a material color (e.g., black plastic looks nice<br />
for a base).<br />
� Press OK.<br />
Step 2: Create the sliding table<br />
� Select “X Axis” in the model navigator so that the sliding table will be defined attached<br />
to the X-axis of the machine. It will then move when the X-axis moves.<br />
� Select Simulation»Construct Entity»Cube<br />
� Type the following:<br />
–1550 Enter –550 Enter 200 Enter<br />
3100 Enter 1100 Enter 50 Enter<br />
� Type “Shroud” as the entity name.<br />
� Select the Material button and select or create<br />
a material color (e.g., silver has a nice metallic<br />
look).<br />
� Press OK.<br />
Step 3: Create the rotary table<br />
� Select “C Table Axis” in the model navigator so that the rotary table will be defined attached<br />
to the C-axis. It will then move when the C-axis moves (and when the X-axis<br />
moves because C is attached to X).<br />
� Select Simulation»Construct Entity»<br />
Cylinder<br />
� Type the following:<br />
0 Enter 0 Enter 250 Enter<br />
500 Enter 50 Enter<br />
� Type “TableTop” as the entity name.<br />
� Select the Material button and select or create<br />
a material color (e.g., pewter).<br />
� Press OK.<br />
<strong>ICAM</strong> Technologies Corporation – Proprietary 47