ICAM Virtual Machine V19 - Kxcad.net

ICAM Virtual Machine ® Version 19.0 Virtual Machine Reference, Toolbar
VM Animation (CeRun & Gener only)
Simulation»Show»Filters»Boolean Overcut: Activates or deactivates the display of
gouges in the finished part, as calculated by the Material Removal Simulation option.
Simulation»Show»Filters»Boolean Undercut: Activates or deactivates the display of
excess stock material, as calculated by the Material Removal Simulation option.
Simulation»Show»Filters»Colorized Boolean: Activates or deactivates the display of a
color graduated difference between stock and part, as calculated by the Material Removal
Simulation option. Select Simulation»Compare (Ctrl Alt Q) to view or modify comparison
settings. Colorized differences are available only when one or both of the Overcut or
Undercut buttons are selected.
Simulation»Show»Filters»Transparent Zero: Modifies the display of colorized differences
between stock and part to either show in a transparent color, or not show, all faces
of the gouge or excess material that are within an acceptable tolerance with respect to the
part.
4.2.7 VM Animation (CERUN & GENER only)
Selects continuous animation mode, which is equivalent to selecting “Continuous” in the
Simulation»Options (Ctrl Alt O) Animation control settings. Select this method to slow
the simulation down to some factor of real time, as controlled by the slider.
Selects stepped animation mode, which is equivalent to selecting “Motion Step” in the
Simulation»Options (Ctrl Alt O) Animation control settings. Select this method to refresh
the display after every step number of motions, as controlled by the slider.
Selects timed refreshed animation mode, which is equivalent to selecting “Time Interval”
in the Simulation»Options (Ctrl Alt O) Animation control settings. Select this method to
refresh the display after every interval number of seconds, as controlled by the slider.
72 ICAM Technologies Corporation – Proprietary