Operating instructions - mobilenavigation.mybecker.com - Harman ...

TELEPHONE MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
104
Selection Significance
Protect entry The device is protected
against automatic deletion
(only available for
unprotected devices).
Remove
protection
Move up /
Move down
The protection of the device
is canceled (only
available for unprotected
devices).
The device is moved one
position forwards/backwards.
Delete The device is deleted
from the device list.
Delete All All devices are deleted
from the list (even the
protected entries).
Automatic connection
After activation, your Traffic Assist Pro attempts
to establish a connection to the cell
phone last connected.
Note:
The cell phone last connected is then
only connected if in the device list no
protected device is in front of this device.
You can switch this function on or off as
described in "Automatic connection" on
page 109.
Prerequisites for a successful connection
are:
• For your Traffic Assist Pro, Bluetooth®
is switched on. (See “Switching Bluetooth
on and off” on page 109.)
• The cell phone is switched on, is in
range, and Bluetooth® is activated.
Searching for cell phones
Note:
Prior to a search, switch on Bluetooth®
on the cell phone to be searched for.
> Call up the device list.
> Press the Search Bluetooth phones
button.
The search starts.
During the search, any devices found are
displayed and you may cancel the search
by pressing the Stop search button.
After the search or after you press the Stop
search button, a list of the devices found
is displayed.