Operating instructions - mobilenavigation.mybecker.com - Harman ...

NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
54
Selecting a destination from Contacts
You can call up Microsoft® Outlook®
contacts that have been imported into the
Traffic Assist Pro and start route guidance
to one.
Note:
The Microsoft® Outlook® contacts are
imported via the Content Manager.
Up to 2000 contacts can be imported.
> Press the Enter destination button in
fast access mode.
> Press the Contacts button.
An input menu appears if there are more
than 10 contacts. If there are fewer than
10 entries, a list of contacts is displayed
straight away.
> Select the first letter of the desired entry
in the input menu.
> Press the button when the desired
name is displayed in the top line.
If there are 5 or fewer entries available
with the letter combination entered, a list
containing these entries will automatically
be displayed.
Note:
You can also have a list corresponding to
the entered letter combination displayed
before then. To do so, press in the
input menu.
> Select the desired entry from the list.
Press the Start button to begin route guidance
to the address displayed for this contact
straight away.
You can also display the address shown for
the contact on the map (On map), store it
in fast access mode (Save), display the
route to the destination (Show route) or
call the number displayed if a phone
number is provided (Call).
If there are a number of addresses provided
for the chosen contact, you can select
one of them after pressing the button 1 .
If there are a number of phone numbers
provided for the chosen contact, you can
select one of them after pressing the button
2
.
2
1