Operating instructions - mobilenavigation.mybecker.com - Harman ...

The Warnings button
In the Warnings settings window you can
select which warnings are to be displayed
by the Traffic Assist Pro or which warnings
are to be output.
> Press the Warnings button in the settings
menu.
The Warnings settings window appears.
The following setting options are then
available:
• Driver alerts
You can have signs displayed, for
example for dangerous curves or steep
gradients, provided this information is
stored in the map data.
• Speed info
You can select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
• Danger spots*
You can receive a warning about danger
points such as permanent speed checks.
Note:
There is no standardised rule in Europe
on the use of this function (warning
about speed checks). Please check the legal
situation in the respective country.
In Germany, for example, it is an offence
to use this function while driving.
NAVIGATION MODE >>>
The Driver alerts button
You can have signs displayed, e.g. for dangerous
curves or steep gradients, provided
this information is stored in the map data.
In addition, you can define whether the
display of the sign is also to be accompanied
by a warning sound.
> Press the Driver alerts button in the settings
menu.
The Driver alerts settings window appears.
The available signs are divided into 4 categories.
The four categories can be enabled
or disabled individually.
The warning sound can be set individually
for each of the four categories by pressing
the symbol with the bell ( warning
sound switched on).
67
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK