Operating instructions - mobilenavigation.mybecker.com - Harman ...

Note:
During the 5 seconds, you can cancel the
switch off process by pressing the Cancel
button or the button.
> Press the Complete off button to switch
Traffic Assist Pro off completely.
Note:
We recommend that you place the Traffic
Assist Pro in sleep mode in the event
of short interruptions to operation (of up
to a week).
This significantly reduces the switch-on
time and the Traffic Assist Pro finds the
satellites required for navigation much
faster.
If route guidance was active when sleep
mode is activated, it is automatically resumed
if the Traffic Assist Pro is switched
back on again within approx. 4 hours.
Button lock
You can protect your Traffic Assist Pro
from inadvertent operation of the touchscreen
or the button.
1
> Push the slide 1 on the left-hand side
of the Traffic Assist Pro downwards.
The button lock is then active. The touchscreen
and the button cannot be operated.
Before you can operate the Traffic Assist
Pro now, you need to push the slide 1
up again.
GENERAL OPERATION >>>
Basic information about the
touch screen
The Traffic Assist Pro is fitted with a
touch screen.
Note:
To ensure that the display's surface is not
damaged, you may only touch it with
your fingers or a blunt, non-smearing object.
25
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK