Operating instructions - mobilenavigation.mybecker.com - Harman ...
Operating instructions - mobilenavigation.mybecker.com - Harman ...
Operating instructions - mobilenavigation.mybecker.com - Harman ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NAVIGATION MODE<br />
> D<br />
> GB<br />
> F<br />
> I<br />
> E<br />
> P<br />
> NL<br />
> DK<br />
> S<br />
> N<br />
> FIN<br />
> TR<br />
> GR<br />
> PL<br />
> CZ<br />
> H<br />
> SK<br />
76<br />
If you wish to calculate a detour around<br />
the traffic problem, press Consider<br />
message, or alternatively Ignore<br />
message.<br />
Note:<br />
When you select Consider message,<br />
then an alternative route is not generally<br />
calculated. This only occurs if it is expedient<br />
with regard to saving time and the<br />
distance to be driven.<br />
You can change the setting selected again<br />
at any time in the message list.<br />
If after the selection of Consider<br />
message the Traffic Assist Pro determines<br />
that an expedient alternative route<br />
is possible, the following display appears.<br />
Note:<br />
This display may also appear if, for instance,<br />
a previously obstructed route is<br />
now free again.<br />
The display provides you with an overview<br />
of the alternative route calculated.<br />
The red route or route marked blue for an<br />
obstruction shows the previous route. The<br />
route marked yellow displays the alternative<br />
route calculated.<br />
In the right section of the display, you can<br />
see how much the route changes and how<br />
much time you will likely save if you use<br />
the alternative route.<br />
> Now press the button, to use the<br />
alternative route or the button to<br />
keep the previous route instead.<br />
The map display<br />
The map display is used primarily for<br />
route guidance. However, you can also use<br />
the map display without route guidance to<br />
show your current position and, for example,<br />
to receive warnings about exceeding<br />
the speed limit.<br />
Calling up the map display<br />
The map display is called up automatically<br />
when you start route guidance.<br />
Without route guidance, you can call up<br />
the map display from the main menu.<br />
> In the main menu, press Show map.