Operating instructions - mobilenavigation.mybecker.com - Harman ...

The Guidance info button
In the Guidance info settings window you
can select which additional information
you would like displayed during route
guidance.
> Press the Guidance info button in the
settings menu.
The Guidance info settings window appears.
The following settings are available:
Setting Meaning
Lane info When this function is enabled,
a small arrow indicates
which lane you
should move into in the
case of multi-lane roads.
Setting Meaning
Signposts When this function is enabled,
you will also receive
information at motorway
intersections
regarding the road signs
which you should follow.
Country info When this function is enabled,
you will automatically
receive generally applicable
traffic
information for the relevant
country when you
cross a national border
(e.g. speed limits).
Note:
This information can only be displayed if
it is contained in the map material.
> Press the relevant button to switch the
required function on or off .
> Confirm your selection by pressing the
OK button.
NAVIGATION MODE >>>
The Route options button
You can edit your driving profile in the
Route options settings window. The settings
made here have an effect on the
route selection and on the calculation of
the estimated journey times.
> Press Route options in the settings
menu.
The Route options settings window appears.
> Select the mode of travel after pressing
the button next to Vehicle.
Note:
The choosing of a profile for the Traffic
Assist Pro Z302 is described under
“Changing the profile” on page 92.
61
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK