Operating instructions - mobilenavigation.mybecker.com - Harman ...
Operating instructions - mobilenavigation.mybecker.com - Harman ...
Operating instructions - mobilenavigation.mybecker.com - Harman ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NAVIGATION MODE<br />
> D<br />
> GB<br />
> F<br />
> I<br />
> E<br />
> P<br />
> NL<br />
> DK<br />
> S<br />
> N<br />
> FIN<br />
> TR<br />
> GR<br />
> PL<br />
> CZ<br />
> H<br />
> SK<br />
72<br />
The Blocked roads button<br />
In the Blocked roads settings window you<br />
can unblock previously permanently<br />
blocked roads (See “Blocking route sections/roads”<br />
on page 88.) or you can<br />
modify the block (time and days of week<br />
of block).<br />
> Press the Blocked roads button in the<br />
settings menu.<br />
A window is displayed containing the<br />
roads that have previously been blocked.<br />
> Select the desired blocked road.<br />
> Press the Clear form button to remove<br />
the road from the list.<br />
or<br />
> Press the Change button to modify the<br />
block.<br />
1 1 1 1<br />
2 2 2 2<br />
> Use the buttons 1 to set the period<br />
(days of the week) when the road is to<br />
be blocked.<br />
Note:<br />
If you select, e.g. Tuesday to Tuesday for<br />
the day of the week, the block only applies<br />
on Tuesdays.<br />
> Use the buttons 2<br />
to set the period<br />
(time of day) when the road is to be<br />
blocked.<br />
> Confirm your settings by pressing the<br />
OK button.<br />
The Reset button<br />
You can reset the navigation settings to<br />
their factory settings.<br />
The settings will then be reset. The fast access<br />
mode data, stored routes and home<br />
address are retained.<br />
> Press the Reset button.<br />
> Press the Yes button.<br />
The navigation settings are reset to their<br />
factory settings.