Operating instructions - mobilenavigation.mybecker.com - Harman ...

SETTINGS
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
126
Scrolling
Using the buttons, it is possible
to scroll through the list in the direction
of the relevant arrow.
Selecting the language
> Press the button for the required language.
> The selection is confirmed by pressing
OK.
A prompt appears indicating that the software
has been re-started, and you are
asked whether you really want to change
the language.
> Confirm the prompt using Yes.
Cancelling the language selection
Pressing the button cancels the language
selection and shows the settings
menu.
Automatic on/off
The Traffic Assist Pro can switch automatically
to sleep mode when the vehicle
ignition is switched off.
Prerequisite:
• The Traffic Assist Pro must be connected
to the vehicle cigarette lighter (see
also page 18).
• The cigarette lighter is de-energized after
the ignition is switched off.
• The relevant function can be switched
on at the Traffic Assist Pro.
Switching the function on / off
> Press the Automatic on/off button.
Depending on the previous setting, the
function will be switched on or off. The
current setting is shown by the icon.
• Top icon: The function is switched on,
the Traffic Assist Pro switches off automatically.
• Bottom icon: The function is switched
off, the Traffic Assist Pro does not
switch off automatically.
Sounds
You can switch the Traffic Assist Pro signal
tone on and off. This also includes the
clicking of the touch screen buttons.
> Press the Tones button.
Depending on the previous setting, the
signal tones are switched on or off.
• Top icon: Tones switched on
• Bottom icon: Tones switched off