Operating instructions - mobilenavigation.mybecker.com - Harman ...

Connection to the mains outlet
!Danger!
Ensure that you do not have wet hands
and that the power supply unit is dry.
Only connect the power supply unit to
a permissible mains power supply.
Connecting power supply
Connection to the public mains grid is
achieved using the optionally available
mains power supply unit. Please proceed
as follows to connect to the mains:
> Hold the connector and push it all the
way into the connecting socket in the
Traffic Assist Pro without using excessive
force.
> Insert the plug of the power supply unit
into the socket.
Note:
Remove the power supply unit when not
using the Traffic Assist Pro for longer periods
of time.
TMC antenna
The TMC antenna included in the accessories
is used to receive traffic announcements.
> Push the connector of the TMC antenna
into the socket provided on the lefthand
side of the carrier plate without
using excessive force.
Note:
The TMC antenna must be routed so
that your ability to drive the vehicle is not
impaired.
GPS-antenna
GENERAL OPERATION >>>
Unit antenna
The GPS antenna is integrated into the
housing.
Note:
The integrated GPS antenna is not suitable
for use in vehicles with anti-glare windows
(metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehicles
with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS antenna.
Please consult your local specialist
dealer.
19
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK