Massachusetts Vehicle Check - Mass08 Management Module ...
Massachusetts Vehicle Check - Mass08 Management Module ...
Massachusetts Vehicle Check - Mass08 Management Module ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Non-Commercial<br />
Chapter 4 – Safety Inspection<br />
Bumpers, Fenders and Fuel Tank 540 CMR 4.04 (12)<br />
Bumper, Fender, Sheet Metal, and Fuel Tank <strong>Check</strong><br />
Bumpers<br />
Fenders<br />
Floor pans<br />
Fuel tank<br />
<strong>Vehicle</strong> frame or unibody<br />
Pass Fail<br />
Equipment:<br />
Proper jacking equipment and safety equipment (jack stands).<br />
Procedure:<br />
The inspector visually checks the following: bumpers, fenders, external sheet metal,<br />
floor pans, fuel tanks, and vehicle frame and / or unibody.<br />
Items to Inspect:<br />
Bumpers, fenders, external sheet metal, floor pans, fuel tank, and vehicle frame /<br />
unibody.<br />
Inspect For And Reject If:<br />
A. Bumpers:<br />
1. There are broken or bent bumpers, fenders, exterior sheet metal or moldings,<br />
having sharp edges due to damage, body rot, or abnormal protrusions extending<br />
beyond normal vehicle extremities so as to constitute a danger to pedestrians and<br />
other motor vehicle traffic.<br />
2. Bumper brackets are not removed when the bumper plates are.<br />
<strong>Massachusetts</strong> <strong>Vehicle</strong> <strong>Check</strong><br />
Ch. 4 - 31