Chapter 3. Operating NetView FTP V2.2.1 MVS - IBM

Server Running Mode
Use the SRVMODE keyword to specify in which mode a server is to run:
SINGLE
Single running mode.
A server can only carry out one file transfer. When the file transfer is
finished the server stops.
CONT
Continuous running mode, update of GDG table.
A server carries out any number of consecutive file transfers. It runs until
it is stopped. This is the default value.
After a generation data set is transferred, the GDG table of this data set is
updated. If you are using MVS/XA, program temporary fix (PTF) OY10531
must be installed.
(CONT,GDG)
Continuous running mode, update of GDG table.
This parameter corresponds to parameter CONT. It is still used to support
compatibility.
┌─CONT───────┐ ├─C──────────┤ ►►──SRVMODE= ─┼─SINGLE─────┼────────────────────────────────────►◄ ├─S──────────┤ └─(CONT,GDG)─┘ Termination Time
Use the TTIME keyword to specify the termination time of a server. When the
specified time is reached, the server stops automatically. If a file transfer is in
progress when a server’s termination time is reached, the server waits until the
file transfer is finished, before terminating.
hh:mm The time in 24-hour format. For example, 3:23 pm is specified as
15:23.
yy/mm/dd The date in year-month-day format. For example, 11 March 1994
is specified as 94/03/11. The default is the current date.
If no value for this parameter is specified, the server runs indefinitely.
116 NetView FTP V2 MVS Installation, Operation, and Administration
►►──TTIME= ─┬─'hh:mm'──────────────┬────────────────────────────►◄ └─('hh:mm','yy/mm/dd')─┘