Chapter 3. Operating NetView FTP V2.2.1 MVS - IBM

An example of what the entries can look like is shown in Figure 47.
VBUILD TYPE=APPL
NFTP��1 APPL AUTH=(ACQ,PASS),VPACING=16,ACBNAME=NFTP��1,APPC=YES, X
DLOGMOD=FTPBIND,MODETAB=FTPFTF,PARSESS=YES, X
AUTOSES=�,DSESLIM=128,SECACPT=CONV
NFTP��2 APPL AUTH=(ACQ,PASS),VPACING=16,ACBNAME=NFTP��2,APPC=YES, X
DLOGMOD=FTPBIND,MODETAB=FTPFTF,PARSESS=YES, X
AUTOSES=�,DSESLIM=128,SECACPT=CONV,
VBUILD TYPE=CDRSC
FTP���2 CDRSC CDRM=CDRM12
FTP���X CDRSC CDRM=CDRM99
FTP���Y CDRSC CDRM=CDRM99
FTP���Z CDRSC CDRM=CDRM99
Figure 47. Example of Combined APPL and CDRSC Definitions
Defining an OSI Server as an ACF/VTAM Application Program Node
Creating a Logon Mode Table
Defining an OSI server as an ACF/VTAM application program node is described in
the OSI/File Services Installation and Customization Guide MVS.
There must be a logon mode table entry for NetView FTP V2.2.1 MVS. This entry
must be defined in the table specified by the MODETAB keyword in the ACF/VTAM
APPL definition, or must be in the ACF/VTAM default logon mode table. The name
must not be SNASVCMG because this name is reserved. However, as NetView
FTP uses LU 6.2 conventions, an entry with the name SNASVCMG must exist in
the ACF/VTAM logon mode table. For different servers, the entries can be in different
tables. A sample logon mode table with the name FTPFTF is shown in
Figure 48.
Note: The values shown may be overwritten by VTAM during conversation establishment.
FTPFTF MODETAB
FTPBIND MODEENT LOGMODE=FTPBIND, C
TYPE=X'��', C
FMPROF=X'13', C
TSPROF=X'�7', C
PRIPROT=X'B�', C
SECPROT=X'B�', C
COMPROT=X'D�B1', C
PSNDPAC=X'��', C
SRCVPAC=X'��', C
SSNDPAC=X'�1', C
RUSIZES=X'8585', C
PSERVIC=X'�6�2�����������������3��'
MODEEND
END
Figure 48. Example of an Entry in a Logon Mode Table
82 NetView FTP V2 MVS Installation, Operation, and Administration