Chapter 3. Operating NetView FTP V2.2.1 MVS - IBM

►►──POSTCONV=name──────────────────────────────────────────────►◄ For further information on using user exits and when they are called, refer to
NetView FTP Customization.
Limit to the Maximum Number of Simultaneous File Transfers
MAXSESS specifies the limit to the maximum number of file transfers that a
server can hold by limiting the number of subtasks.
For servers running in single mode, the MAXSESS value must be 1. The value
of this parameter is an integer from 1 to 32. The default value is 16.
This value must not exceed the value of the DSESLIM parameter specified in
the ACF/VTAM APPL statement. See “Defining an SNA Server as an
ACF/VTAM Application Program Node” on page 79.
┌─16──────┐ ►►──MAXSESS= ─┴─avlsess─┴───────────────────────────────────────►◄ Maximum Number of Simultaneous File Transfers
AVLSESS specifies the number of simultaneous file transfers that a server can
hold. The operator can change this parameter while the server is running, but
the value must never exceed the value specified in the MAXSESS server initialization
parameter.
The value of this parameter can be an integer from zero to the value of
MAXSESS.
A value of zero indicates that neither locally nor remotely-initiated requests are
served. The default is the value of MAXSESS.
┌─maxsess─┐ ►►──AVLSESS= ─┴─avlsess─┴───────────────────────────────────────►◄ Maximum Number of Locally-Initiated File Transfers
AVLLRH specifies the maximum number of locally-initiated file transfers that
can be active in a server. It is used as a limit value at startup time. This value
can be modified by the operator. The value of this parameter can be an
integer from zero to the value of AVLSESS.
A value of zero indicates that no locally initiated requests are served. The
default value is 1, if the value of AVLSESS is less than 3, otherwise, the default
is (AVLSESS − 2).
►►──AVLLRH= ─┬─avlsess-2─┬──────────────────────────────────────►◄ └─avllrh────┘ Maximum Number of Simultaneous Remotely-Initiated File Transfers
AVLRRH specifies the maximum number of remotely-initiated file transfers that
can be simultaneously active in a server. It is used as a limit value at startup
time. This value can be modified by the operator.
120 NetView FTP V2 MVS Installation, Operation, and Administration