Chapter 3. Operating NetView FTP V2.2.1 MVS - IBM

When processing a remote request (one created at another system), the
local server does one of the following:
� If the originator of the request specifies security parameters, the
server uses these.
� If the originator of the request does not specify security parameters,
the server tries to gain access to the file using its own authorization.
It is normally advisable to use the default value, in order to ensure data security.
NO can be used, for instance, if you are not using a System Authorization
Facility (SAF) product, or if you have established your own data security provisions.
For more information on data security, refer to “Data Security” on
page 180.
Note: The BOTH option that was available in earlier releases of NetView FTP
MVS has been removed to improve data security. Wherever appropriate
replace BOTH with the YES or NO options.
Events
NVEVENT indicates if NetView FTP V2.2.1 MVS is to write operator terminal
messages for the following events:
Value Description
1 I/O error on the data set
2 VSAM error on the request queue, checkpoint data set, sending
data set, or receiving data set
3 Abend during I/O
61 Server ready
62 Server stopped
63 Abnormal termination of a server
64 File transfer started
65 File transfer stopped
66 Security program error during user validation
67 Dynamic allocation error during file access.
These events are reported in such a way that they can be recognized and
processed by NetView CLISTs. However, if there is no NetView CLIST active,
the messages are sent to the operator console.
NVEVENT is an optional parameter.
122 NetView FTP V2 MVS Installation, Operation, and Administration
┌─ALL───────┐ ►►──NVEVENT= ─┼─n─────────┼─────────────────────────────────────►◄ │ ┌─,─┐ │
└─( ── ─ ─┘
▼
n ── ┴ )