Chapter 3. Operating NetView FTP V2.2.1 MVS - IBM

┌─3��─┐ ►►──OIRECDEL= ─┴─n───┴──────────────────────────────────────────►◄ Termination Time
Use the TTIME keyword to specify the termination time of the server. When
the specified time is reached, the server stops automatically. If a file transfer is
in progress when a server’s termination time is reached, the server waits until
the file transfer is finished before terminating.
hh:mm The time in 24-hour format. For example, 3:23 pm is specified as
15:23.
yy/mm/dd The date in year-month-day format. For example, 11 March 1994
is specified as 94/03/11. The default is the current date.
If no value for this parameter is specified, the server runs indefinitely.
►►──TTIME= ─┬─'hh:mm'──────────────┬────────────────────────────►◄ └─('hh:mm','yy/mm/dd')─┘ Server Class
Use the CLASS keyword to assign specific classes that are used exclusively for
OSI transfers.
►►──CLASS= ─┬─ALL───────┬───────────────────────────────────────►◄ ├ ─c─────────┤
│ ┌─,─┐ │
└ ─( ── ─ ─┘
▼
c ──┴
)
Internal Trace
Specifying a value for TRACE tells NetView FTP V2.2.1 MVS to take an
internal trace while the server is running.
Use the internal trace for maintenance purposes only. Do not use it during
normal production time, as it severely degrades the performance of NetView
FTP V2.2.1 MVS.
If nothing is specified, no trace is taken.
GROUPn Specifies one of the server module groups
CLm Specifies a trace class.
Module groups and trace classes for server traces are described in detail in
“Tracing an SNA Server” on page 140.
128 NetView FTP V2 MVS Installation, Operation, and Administration
┌─,─┐ ►►──TRACE= (GROUPn, ── ─ ─
▼
CLm ┴ ) ────────────────────────────────────►◄