Defensor Mk5 Technical Documentation

4.3 Options
The following table presents an overview of all options which are available for the steam humidifier
Defensor Mk5.
Defensor Mk5 Visual Process
Steam capacity in kg/h 5...16 20...40 50...80 5...16 20...40 50…80
Interface RS232/RS485
(Interface PCB RS232/RS485 for data
exchange with a building control
––– RS
system)
number – – – 1 1 1
Remote operating and fault indication
(PCB with relay contacts for the connection
of remote displays for “Operation”,
RFS
“Steam”, “Fault” and “Service”) number 1 1 1 1 1 1
Pressure compensation kit up to 10’000 Pa
(Assembly kit for the installation of the
filling bowl on the equipment cover, for
the operation of the steam humidifier in
installations with duct air pressures up
OVP
to 10’000 Pa)
number 1 1 2 1 1 2
Transformer 450-500V/230V TRAF 1)
(Transformer for systems without a separate
control voltage supply)
number 1 1 1 1 1 1
Connection terminal 400-415 V/3~
(Separate terminals for systems where
direct connection of heating voltage to
main contactor (standard version) is
KLK KLG KLK KLG
not permitted by local regulations) number 1 1 2 1 1 2
Unit housing stainless steel S-Inox L-Inox S-Inox L-Inox
1) When ordering indicate the type of unit
number 1 1 2 1 1 2
15