Defensor Mk5 Technical Documentation
Defensor Mk5 Technical Documentation
Defensor Mk5 Technical Documentation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
– Steam distribution pipe is mounted less than 300 mm above the top edge of the humidifier:<br />
Condensate hose is led down with a minimum slope of 20 %, in the form of a siphon (min. hose<br />
bend radius Ø200 mm), directly into a discharge funnel.<br />
Ømin. 200 mm<br />
min. 20 %<br />
Note: If your unit feeds a number of steam distribution pipes, the individual condensate hoses are to<br />
be led into the discharge funnel.<br />
Important! Before putting the unit into operation, the siphon of the condensate hose must be filled with<br />
water.<br />
5.3.5 Inspecting the steam installation<br />
min. 300 mm<br />
min. 20 %<br />
Use the following check list to ascertain that the steam installation was performed correctly:<br />
– Steam distribution pipe<br />
Steam distribution pipe correctly positioned and secured (screws tightened)?<br />
Are the outlet orifices at right angles to the air flow direction?<br />
– Steam hose<br />
Maximum length of 4 m?<br />
Minimum bend radius of 300 mm (100 mm with fixed piping)?<br />
Have the instructions for hose positioning been followed?<br />
Steam hose: no sagging (condensate pocket)?<br />
Rigid steam lines: properly insulated? Correct installation material used? Minimal internal<br />
diameter maintained?<br />
Steam hose securely attached with clamps?<br />
Heat expansion during operation and shortening of the hose with ageing taken into consideration?<br />
– Condensate hose<br />
Downslope of at least 20 %?<br />
Siphon existing and filled with water?<br />
Condensate hose correctly fixed?<br />
min. 300 mm<br />
Ømin. 200 mm<br />
29
Change language