Defensor Mk5 Technical Documentation

Removal and dismantling of the steam cylinder
Caution! Before commencing any dismantling work, the steam-air humidifier is to be taken out
of operation as described in chapter 6.3 and rendered safe from inadvertent operation.
Caution! If steam has been produced shortly before discontinuing operation, the steam cylinder
will be hot. Well-insulated gloves should therefore be worn when carrying out the removal
operation.
1 2 3
1. Release the front door locking devices using a screwdriver (rotate 90° left) and remove the front
doors.
2. Free the upper hose clamp of the steam hose using a screwdriver and pull the hose downward from
the steam connection.
3. Press snap-fastenings together, then remove the heating cable loom plug connector from the
connector socket.
4 5 6
4. Release the clamping ring (steam cylinder fixation).
5. Lift the steam cylinder carefully from the coupling bush and remove it towards the front of the unit.
Caution! Set the steam cylinder down carefully.
6. Loosen the steam cylinder cover clamping ring.
55