catalogue 3 1 0 explosionprotectedpro ducts

EX-EMERGENCY LIGHT FITTING
AB 12108-EVG
Metal version for Zone 1
These light fittings are in accordance to the
European Norm EN 50014ff. for the temperature
class T6. It is therefore certified for
use in the Zones 1 and 2.
Additionally they fulfill the directive EN
60598, Part 2.22 for Emergency Lighting
accordingly. The Ex-light fitting AB 12108-
EVG is fitted with an electronic ballast and
an 8 W fluorescent lamp. It is used for illuminating
emergency exit routes, as well as
for pictographic emergency light fittings.
The housing is made of a copper-free aluminium
and has a borosilicate glass tube.
The built-in reflector is made of a high-polished
aluminium allowing a maximum of
illumination.
With the integrated CG-S-Monitoring module
with coding switch (for max. 20 light fittings)
which assigns an address to each
light fitting, they can be connected as singularly
monitored emergency light fittings to
the CEAG emergency lighting supply system.
The switching mode can be freely
programmed by the operator for mixed
operation in a single circuit.
Connection with the CEAG emergency
lighting supply system with programmable
modus choice and individual
monitoring
Housing made of copper-free aluminium
with a borosilicate glass tube
8 W fluorescent lamp for mains and
emergency lighting
Safety Standard IP 67
3.6
Polar curve
AB 12108-EVG
90
60
50
100
150
30
200
250
30
C 0
0
C90 l/cd/klm
Rated luminous flux of lamps: approx. 450 lm
Light fitting efficiency in operation: approx. 83 %
60
90