catalogue 3 1 0 explosionprotectedpro ducts

E X - T O R C H L I G H T
Stabex M0
The Stabex M0 was specially developed
as an inspection lamp for gas or empty
mineral oil tanks where the permanent
hazard of an explosive gas atmosphere
exists. Furthermore it is also suitable for
areas where long-term combustable
dust/air mixtures are present.
The Stabex M0 explosion-protected torch
has specifically been approved for use in
Zone 0 hazardous areas up to the temperature
class T6, and also fulfills the ATEX-Directive
94/9/EG.
The Zone 0 safety requirements are met,
since a permanent overlapping of 2 to 3
explosion categories is provided for. The
torchlight may be operated in the Zone 0
and Zone 20 without additional safety measures
up to a height of 5 metres above
ground level. After use, the lamp must not
be left in the Zone 0 or Zone 20 hazardous
areas.
The rotary switch is designed for singlehanded
operation. Even when safety gloves
are worn, it can be operated without difficulty.
The housing of the extremely robust
torch is made of stainless steel and bronze
which prevents the generation of ignitable
sparks due to impact. The multipart front
pane is made of mineral safety glass.
The torch is equipped with 2 dry cells size
D according 8 IEC 86 LR20 which are impact-protected
by a metal sheath.
Zone 0 and Zone 20
Extremely robust housing made
of stainless steel and bronze
Ergonomic switch design makes it
suitable for operation with safety gloves
International Approvals
1.8
Range-diagram Stabex M0
14
63
2
70
2,5
10
120 cm/Ø
1 Lux
16 m