catalogue 3 1 0 explosionprotectedpro ducts

E X - I N S T A L L A T I O N U N I T S A N D M A T E R I A L
Simply clip on
A fully compatible clip-on mounting system
is available for fixing the new wall socket
onto walls, channels and pipes.
Mounting plates made of glassfibre
reinforced plastic – if required,
with a stainless steel
canopy – are available in
different sizes. They are
simply pre-installed where
required. The wall socket
is then clipped onto the
pre-installed mounting
plate – its that simple!
Thus, this system does
not only simplify installation,
but it also allows
greater flexibility when
replacing components
and last, but not least, it
saves time and money.
Voltage-free connection and
disconnection
All CEAG explosion-protected sockets and
couplers up to a rated current of 32 A are
fitted with a flameproof interlocking switch
that does not allow power to be drawn until
the correct plug has been inserted and
turned, whereby, not only the individual
phases, but also the neutral conductor are
switched. Therefore, arcing cannot occur
when inserting or withdrawing the plug,
because the socket pins are always
voltage-free before the interlock is actuated
or after it has been released.
Variable cable entries
Regardless of the application, whether
using metal or plastic cable entries or hubs
for the connection of conduit systems to
UL, whether as standard on the bottom or
optionally on the top, the new wall sockets
can be fitted with a wide variety of cable
entries. On request, an internal metal frame
for potential equalization can be integrated
when using metal cable glands.
All-in-One
The easily accessible cable clamp of the
plugs and couplers provide strain relief and
protection against twisting in one. The advantage:
Any external forces on the cable
are efficiently intercepted and do not affect
the electrical connections.
Seal and IP protection
The particularly long seal of the cable entry
ensures the high IP 66 ingress protection.
Foreign matter and moisture have no chance.
The diverse sealants that can be used
allow for a generous clamp and sealing
area.
CEAG SICHERHEITSTECHNIK GMBH 5.3
5.3
1
2
3
4
5
6
7
8
9